ENVIRONMENTALLY
FRIENDLY COATINGS
|
|
|
Seals,
Reinforces, Rejuvenates Surfaces. Metal, Wood, Asphalt,
Concrete, Fiberglass.
|
 |

HOME

SITE INDEX

PRODUCTS

ORDER FREE SAMPLE

LINK PAGES
CONTACT US

FEATURED PRODUCT
|
|
|
|
|
|
Liquid Siding Paint
Coating
Residential
Industrial Construction
Commercial
Sidings
SIDE-IT
is presently applied on
various Siding Surfaces
|
|
|
|
|
|
WATER-BASED
& ECO- FRIENDLY COATING

Vinyl Siding
Wood Siding
Aluminum Siding
Brick Sding
Residential
- Industrial - Commercial
SIDEIT
orders either done by phone or e-mail
TEL
: 514-685-9463
Let
us know quantity needed
-
(one
gallon covers approx 100 -110 sq. ft with one coat
-
2
coats recommended )
Our
Price per gallon depends on quantities ordered
SIDEIT
is also Avialable in 5 gallon pails
We
offer a discount price on large orders
There
is no Extras charge on custom colors choices
or in Texture smooth or anti-slip finish
FEEL
FREE TO EMAIL
US OR CALL
US WITH ANY QUESTIONS
OR FOR ADDITIONAL INFORMATION
Specified
Shipping & Handling cost is to USA and
Canada Only
For Overseas orders please contact
us
FEEL
FREE TO EMAIL
US OR CALL
US WITH ANY QUESTIONS
OR FOR ADDITIONAL INFORMATION
|
|
|
|
Surface Preparation:
- Remove all dirt, loose metal, rust, debris. Roughen surface with sandpaper. Remove all oils and grease. No Primer is necessary.
- Apply First Coating on surface to be treated and repaired.
- Patch all cracks, leaks and seams around vents, stacks, and air conditioners using Metal or Fiberglass Patch.
- Apply coating over patched area. Let Dry and reapply second to third coat.
- Provides a strong flexible repair that allows for expansion and contraction on all cracks, seams and stress areas
Testimonial from Independent Testing Laboratory:
T coating "showed no loss of adhesion, cracking or peeling and no loss of its protective value when bent at 0° F or minus 18° C through 360° F over 1/8 diameter mandrel. It showed no evidence of rusting or blistering or softening. The same tests results were shown when exposed to hydrochloric, nitric and sulfuric acids, as well as immersed in water at 23° C for a continuous 18 hours. The coating exhibited excellent resistance to abrasion, after 136 kg. or 300 pounds of falling sand, there was no visible wear-through. When a 2 lb. steel ball was dropped from 8 feet / 2.5 meter with the impact at the center of a steel plate, coating exhibited firm adhesion outside the impact area. Using a class 5 knife test there was no evidence of flaking or loss of adhesion.
|