ECO-FRIENDLY - INDUSTRIAL PROTECTIVE COATING SEALER

WATER-BASED & ECO- FRIENDLY COATING

Industrial, Construction, Commercial, Residential , Military Uses

Industrial Protective Coating

Metal - High Impact - Anti-Corrosion and Anti-Rust Inhibitor, Metal Corrosion Control, Anti-Corrosion / Anti Rust / Grit / Anti-slip & Smooth Coatings Available. High-Impact Resistant, Non-Hazardous, Eco-Friendly, Water-Based Coating.

Concrete Sealer Coating- High Impact -Resistant to Extreme Environments- 

Resistant to salt, moisture, chemicals ,rust/corrosion ,heavy impacts,  UV rays, acids ,extreme temperatures.

CLICK BELOW For TEST DATA and MSDS

GM Standard Results - Standard TEST Results - Material Safety

CLICK for FREE  4 ounce Can Sample

WHAT A JOB Industrial
is an Environmental and User-Friendly
Non-Toxic, Water-Based, State-of-the art Liquid Polymer.

WHAT A JOB Industrial is applied directly on
 Metal, Wood, Concrete, Fiberglass, Rubber and Asphalt.
 No Primer is necessary for application !!

WHAT A JOB Industrial can be BRUSHED, SPRAYED, ROLLED or DIPPED.
The results are a Rock Hard Diamond tough finish.
Available in Grit (non-slip) or Smooth finish.

Eco-friendly High-Impact Liquid Coating. Industrial, Commercial,Construction & Residential applications. Apply directly on Metal, Wood, Concrete, Asphalt, Rubber & Fiberglass Surfaces.Rock-Hard Anti-Slip/Smooth Finish. Flexible. Resistant to extreme temperatures & elements.Colors

Properties - Advantages of Use - Application - Patch and Repair - Custom Colours

CLICK BELOW For TEST DATA and MSDS

GM Standard Results - Standard TEST Results - Material Safety Data

CLICK for FREE  4 ounce Can Sample

PROPERTIES

• WHAT A Job Marine is a Special blend of state-of-the-art liquid  polymers.
• Non-Flammable
• Non-Corrosive
• Grit /Anti-slip & Smooth Coatings
• Non-Hazardous, Eco-Friendly, Water -Based Coating
• Rust and corrosion inhibitor, RESISTANT to SALT, Moisture, GASOLINE, Oil, Chemicals , ACIDS-(Hydrochloric, Nitric and Sulfuric,)
• CRACKING, CHIPPING, ABRASIONS, SPLITTING, WARPING
• High Impact Coating
• Withstand Extreme Low And High Temperatures
• Non-Hazardous Coatings
• Eco-Friendly, Non-Toxic, Non-Flammable,  and Non-Corrosive.
• Rock-Hard Tough Finish
• Available in anti-slip / smooth finish.
• High Impact Resistant
• WITHSTANDS TEMPERATURES up to 300° C / 572° F.
• 100% FLEXIBLE  Coating 

APPLICATION

• BRUSHED, SPRAYED, ROLLED
• Metal, Fiberglass, Wood, Concrete, Rubber, Asphalt Surfaces
• No Primer Needed
• One gallon covers 12 sq.m / 130 sq.ft. with one  coat
• Surface must be clean and dry
• Apply in temperatures above 10° C/50° F
• Apply 2 to 3 coats for maximum protection
• Use Clean brush /Roller /Spray Gun with Warm Water

ADVANTAGES OF USE

• Specifically Formulated to a Super-Hard  finish. Smooth or Anti-slip finish.
•  Resistant to salt, moisture, anti-rust/anti-corrosion, chemicals, acids, extreme to hot or cold temperatures.
• Can Be Brushed, Roller or sprayed directly on surface..
• No Primer necessary! Apply directly on metal, wood, concrete, asphalt, fiberglass & rubber surfaces . 
• Fast Drying.Less than 20 minutes. In Warm to Hot Temperatures
• High Impact resistant Resists wear to severe cargo impact, 
• Anti-corrosion -salt water and corrosive chemical acid spills.
• Anti-Slip adds safety for applications where anti-slip/anti-shifting is required.
• Custom Colors
• Extremely resistant to WEATHER
• Repels WATER.Salt & excellent for WATERPROOFING.
• Rust Repair. Crack & Hole Sealer 
• good spreadability
• A non-porous coating that won't crack chip, or peel.
• Isolates metal from moisture thus preventing steel rust.
• Fluorescent Pigment Available -  providing clear visual safety benefits
• Other  Applications:
• Steel coatings
• Inhibitor Corrosion. Aluminum Corrosion.  Corrosion Control
• Resistance
• Protection & Solution
• Anti-Rust. Rust inhibitor
• Wood, Metal, Concrete, Coating and Sealer
• Rust Repair
• Boat Decks
• Metal Filler

 

Available in CUSTOM COLORS
with an order of 5 gallons or more !!

PATCH and REPAIR

Surface Preparation:

1. Remove all dirt, loose metal, rust, debris. Roughen surface with sandpaper. Remove all oils and grease. No Primer is necessary.
2. Apply First Coating on surface to be treated and repaired.
3. Patch all cracks, leaks and seams around vents, stacks, and air conditioners using Metal or Fiberglass Patch.
4. Apply coating over patched area.Let Dry and reapply second to third coat.
5. Provides a strong flexible repair that allows for expansion and contraction on all cracks, seams and stress areas

Testimonial from Independant Testing Laboratory:

The WHAT A JOB Industrial coating "showed no loss of adhesion, cracking or peeling and no loss of its protective value when bent at 0° F or  minus 18° C through 360° F over 1/8 diameter mandrel. It showed no evidence of rusting or blistering or softening. The same tests results were shown when  exposed to hydrochloric, nitric and sulfuric acids, as well as immersed in water at 23° C for a continuous 18 hours. The coating exhibited excellent resistance to abrasion, after 136 kg. or 300 pounds of falling sand, there was no visible wear-through. When a 2 lb. steel ball was dropped from 8 feet / 2.5 meter with the impact at the center of a steel plate, coating exhibited firm adhesion outside the impact area. Using a class 5 knife test there was no evidence of flaking or loss of adhesion.